Store products

The chemicals we supply are the safest brush plating chemicals on the market, however as with all chemical processes, safety is of the utmost importance and safety gloves must be worn at all times during the plating process.

These gloves are non-latex and powder free.

90ml beaker.
Ideal for holding solutions while brush plating.

They also have screw caps for short-term storage of electroplating solutions.

60ml beaker.
Ideal for holding solutions while brush plating.

They also have screw caps for short-term storage of electroplating solutions.

20ml beaker.
Ideal for holding solutions while brush plating.

They also have screw caps for short-term storage of electroplating solutions.

These leads are essential for use with brush plating equipment.
They are stackable allowing one output to be shared by different processes and are also rated at a hefty 19 amps - suitable for all brush plating processes.

The conductivity tester allows you to check that surfaces are conductive prior to plating.

Simply touch the test probes on the work to be plated and if the needle does not move, the surface is non-conductive.

Crocodile clips are a useful addition to any brush plater's tool kit.

If you need to get a firm grip on the part you are plating, it has the added benefit to give you a third hand when needed.

The electrode handle is is used to hold the various electrodes required throughout the plating process.

Selecting the best electrode for the job is very important and is covered in the plating manual which can be downloaded by clicking HERE

Extension Leads alloy you to increase the operating length from the rectifier.

The main advantage of this is one of heath and safety for example; when working in damp environments such as a bathroom.

Extension Leads are ideal for mobile electroplating

This is a very useful alternative to using the crocodile clip to make electrical contact with your work during the plating process.

Simply touch it on the work and plate away!
The picture above shows the extension rod connected into the read lead.

This electrode is ideal for copper plating larger surface areas and other un-complex shaped articles.

It can plate at 2 - 3 times the rate of the normal electrode when plating a flat or un-contoured surface.

This electrode is ideal for plating larger surface areas and other un-complex shaped articles.

It can plate at 2 - 3 times the rate of the normal electrode when plating a flat or un-contoured surface.

This electrode is ideal for plating larger surface areas and other un-complex shaped articles.

It can plate at 2 - 3 times the rate of the normal electrode when plating a flat or un-contoured surface. It should be used for chrome stripping and cleaning only.

The Flat Swab, used with our range of flat electrodes, is ideal for the fast plating of medium sized objects such as mobile phone covers.

This kit is ideal for those of you with no access to a polishing (buffing) machine.

Nickel, stainless steel, copper, brass and aluminium can be polished with Autosol while a finer cut can be obtained with Brasso.

Goddard's is ideal for bringing up the final luster on silver and thick gold plate.

A link to the method sheet on this product will be sent with the invoice upon purchase.

This electrode is ideal for plating large areas such as clock faces name plates and dials on barometers.
It can reduce the plating time by as much as seventy percent.
The Large Swab is available on the online shop to fit on this electrode.